Operations Overview
4 buildings · 12 monitored assets · data through Jul 5, 2026, 11:45 p.m.
Alarm Insights — Jun 5, 2026 – Jul 5, 2026StaticDev
1 alarm type in window
2 alarm types in window
2 alarm types in window
Most Severe in This Window
Fan vibration critical
Takeaway: Remained active 7.5 days before clearing — review response and escalation time.
May relate to: Short-cycling (repeated restarts) — see Detected Conditions below.
VFD overcurrent trip
Takeaway: Resolved by Bearing Replacement on Jun 25, 2026. Annunciated 3× in a single day — the condition was oscillating at its limit; address the root cause rather than re-acknowledging.
May relate to: Short-cycling (repeated restarts) — see Detected Conditions below.
Work order: bearing replacement · Jun 25, 2026
Chiller high-pressure trip
Takeaway: Cleared in 1.5 h without a linked work order.
May relate to: Chiller efficiency below expected (COP) · Plant energy above weather-normal — see Detected Conditions below.
All Alarms · 5 alarm types
Detected Conditions — Jun 5, 2026 – Jul 5, 2026StaticDev
Asset Health report →Asset Alarm & Service History — Jun 5, 2026 – Jul 5, 2026
Asset registry →Performance Summary — Jun 5, 2026 – Jul 5, 2026
Daily Electrical Energy by Asset
kWh consumed per day
Daily Cost by Rate Period
Ontario time-of-use, CAD per day
Recent Activity — 14 Days
Fault report →VFD overcurrent protection tripped (trip 3 of the day). Current at trip: 18.5 A. Vibration: 7.29 mm/s. Third trip - unit held out of service pending bearing replacement.
VFD overcurrent protection tripped (trip 2 of the day). Current at trip: 17.7 A. Vibration: 7.23 mm/s. Second trip after reset. Vibration severely elevated.
VFD overcurrent protection tripped (trip 1 of the day). Current at trip: 16.2 A. Vibration: 7.21 mm/s. Operator reset after inspection; no obstruction found.
Supply fan vibration crossed warning threshold (5.0 mm/s). Reading: 5.06 mm/s. Rapid onset over ~10 days suggests belt wear or sheave misalignment - inspect drive assembly.
Emergency replacement of supply fan motor bearings (DE and NDE). DE bearing showed brinelling. Vibration post-repair: 2.4 mm/s (within spec).